File Name: | acterna ms 1400 manual.pdf |
Size: | 2675 KB |
Type: | PDF, ePub, eBook, fb2, mobi, txt, doc, rtf, djvu |
Category: | Book |
Uploaded | 9 May 2019, 20:48 PM |
Interface | English |
Rating | 4.6/5 from 584 votes |
Status | AVAILABLE |
Last checked | 9 Minutes ago! |
The information in this document is not to be used or duplicated in any manner without the prior approval, in writing, of Acterna. Acterna CATV Division. Risk of loss or damage to Product returned to Acterna for repair or replacement shall be borne by customer until delivery to Acterna. MEASUREMENT LOGGING With the MS1400, you can store installation checks that you have performed throughout the day. You can also store scan and tilt measurements. Each file is time and date stamped and can be recalled. Using the built-in serial port, you can print files and even upload them to Acterna's StealthWare for further analysis and archiving. Mode Selection Keys Installation Mode Easily checks the channels that you have installed and verifies that they are within limits. Notice that these keys have a numeral and up to three alphabetic characters labeled on them. You can only access the characters when alphanumeric entry is appropriate. In the alphanumeric entry mode, you sequence through each character and the numeral by repeatedly pressing the key. Auto Reference Lets MS1400 automatically set the reference level for you. Snap Shot Holds the measurement. The measurement is retained even if the cable is disconnected from the input. Clear Clears your entry and lets you start over again. Store File Stores an Installation, Scan, or Tilt screen for later viewing, or printing or uploading to StealthWare. This means that the MS1400 interprets the next key that you press to be a secondary function. This indicator is displayed to warn you that the battery is low. It displays the current date and time. A bar meter indicates the charge remaining in your MS1400's battery. When the battery meter reads low, you should switch to a freshly charged battery soon. Notice that the currently chosen item is highlighted.An edit box can be either “active” or “inactive”. You can tell by looking at the border. To access the NAVIGATOR, press Navigator key.
An icon appears on the screen for each available mode. Press Up, Down, Left, and Right Arrows to highlight the icon that represents the mode you want to use. The CONFIGURE mode allows you to select global, and measurement related preferences and to build and edit a channel plan that matches your cable plant. This feature is useful for conserving battery life by preventing the MS1400 from being left on accidentally when it is not in use. You can set the time-out period to 1, 3, or 5 minutes.Backlight Time-Out Sets the amount of inactive time allowed before the backlight turns off automatically. TIP: A serial to parallel converter (such as the one manufactured by Black Box Corp.) can be used for printing to a parallel printer. Be sure that the baud rate setting of your MS1400 matches that of the device that it is connected to. Clone You can easily transfer the entire configuration from one MS1400 unit to another. You can select from: dBmV, dBmV and dBm. Probe Compensation This can be used to compensate for losses associated with probe points found on certain amplifiers. How To Edit Test Points Your MS1400 is capable of performing tests at various locations including; SUBSCRIBER DROP, GROUND BLOCK, TAP, and CUSTOM (user-defined). Each test point has its own set of limits that you can edit. To disable a limit, select the Limit and press Select soft key. A check mark appears in the left-hand column to indicate when a test point is enabled. If the test point is already enabled, pressing the Select soft key disables it. Press Enter key to access the calibration options. Noise Floor Correction This calibration measures the noise floor of your MS1400. You should perform it periodically to ensure accurate measurements. Press Enter key to initiate the calibration procedure. Your MS1400 will guide you through the process. Remember that the Acterna instruments are capable of learning a channel plan from a cable system and storing it as a built-in plan.
Learn the Channel Plan The MS1400 is capable of identifying which channels are on your cable plant. This allows you to quickly and easily generate a customized channel plan. Press OK soft key to proceed to the Build Channel Plan- STEP 2 screen. The screen contains a list of standard channel plans to serve as a basis for your own plan. NOTE: If your system is a PAL M type, select NTSC for your channel plan. Then press OK soft key. The unit will start searching for active channels and display the Build Channel Plan - STEP 4 screen. 1-28. Press Right soft key to return to the main Channel Plan menu (page 1-23). How to Edit the Channel Plan Why edit the Channel Plan. An accurate channel plan is essential for testing the cable system, including limits for analog and digital carriers. This should be disabled. A channel may be missed if the frequency is special or level too low ( This is another place where you can enable or disable the channel.In the edit box, you can select any package that is enabled (see Select Channel Packages page 1-32). When you are checking an installation, you can specify which packages the subscriber has ordered and your MS1400 will verify that the channels are correctly installed. Scrambled If the channel is scrambled, select YES here so that accurate measurements can be made. Select a digital carrier (QAM, QPSK, QPR, CAP-16) and press Enter key. Highlight Frequency, press Enter key. Type in a value for Center Frequency and press Enter key. Highlight Measurement BW (MHz), press Enter key. Type in a value for the bandwidth and press Enter key. Connect the two units with the cloning cable. Set the baud rates for the two units equal. In the Configure screen (page 1-23), highlight Ingress and press Enter key to access the ingress options. Start Frequency Enter the Frequency where you want to start the Ingress measurement. This will allow you to easily verify whether ingress is within tolerance.
Limit Value When the CHECK LIMIT feature is enabled, the FAIL indicator will appear whenever the Ingress measurement exceeds this value. Each measurement mode discussion includes detailed descriptions on how to perform the measurement and use the operating controls and indicators. Selecting The Test Point The next thing you should do is tell your MS1400 at which test point you are located. This determines which set of limits are used. Press Sequence Through Test Points soft key to sequence through the. The test point that you have selected is represented in the upper portion of the screen by one of the following icons: Subscriber Drop Ground Block User Defined NOTE: Be sure that you have enabled all of the test points that you are interested in using. NOTE: Only the limits that are enabled in the selected test point appear on this screen. If there are no enabled test points, this screen will not be available. You can however, view the CHANNEL LIST and CHANNEL MEASUREMENT screens described below. Adjacent Channel Failures lower adjacent channel level upper adjacent channel level both upper and lower adjacent channel levels Video Level Failures video level too high video level too low. Space is provided for you to fill in subscriber information. You can attach the report to your work order or file it for future reference. Tuning By Channel When you are tuned to a channel, both the video and audio carriers of the channel are measured and displayed simultaneously. When you choose frequency tuning, your MS1400 tunes to the video carrier frequency of the selected channel. The frequency. Enter the desired value in the edit box that appears. NOTE: The unit must be in the digital mode. Press Maximum digiCheck Accuracy soft key for maximum accuracy. The measurement is not retained when another mode is selected or the MS1400 is shut off.Under-range The signal level is below the measurement range of the instrument. Error A hardware problem exists.
If this condition persists, contact Acterna (see TECHNICAL SUPPORT page 3-4) 2-11. This is the level at the very top line. Adjusting The Scale The scale setting is displayed above the graph. First, you need to tell your MS1400 which test point you are at. This determines which set of limits is used. Press Enter Limits Submenu soft key to access the limits submenu. Your MS1400 can indicate the minimum and maximum carrier level limits on the graph. When the cursor is on an analog channel, video min and max are used. When the cursor is on a digital channel, the digital min and max are used. The measurement is not retained when another mode is selected or the MS1400 is shut off.TILT mode can only be accessed by choosing Tilt Mode icon from the NAVIGATOR. A spectral graph of the TILT carriers appears. IMPORTANT: You can choose which carriers appear on this screen when you configure your channel plan (see Select Tilt Channels page 1- 32). The measurement is not retained when another mode is selected or the MS1400 is shut off.You can access this mode by choosing Full Scan Mode icon from the NAVIGATOR. NOTE: The channels that appear on this screen are the same ones that you selected when you configured your tilt channels. First, you need to tell your MS1400 which test point you are at. This determines which set of limits is used. Press Cycle Through Test Points soft key to sequence through the available test points. The test point. The measurement is not retained when another mode is selected or the MS1400 is shut off.Your MS1400 will guide you step by step. Choose Location If desired, you can log information about the location at which you are performing the test. NOTE: Your MS1400 will remind you when you have not stored the location. You should only do this, however, if you think you will return for another test. Your MS1400 will let you know if there is already a results file with the name that you enter. If desired, you can overwrite an existing file of the same name.
Your MS1400 uses an internal temperature sensor for this purpose. If you prefer to use your own thermometer, you can manually enter the temperature here. IMPORTANT: For scheduled tests, the manual temperature entry is used for the first interval only. When the auto test is complete, your MS1400 will display a list of Auto Test files that are available for viewing and printing. NOTE: See VIEW page 2-27 to find out how to access files from Auto Tests that you have performed. Files are categorized into Installations, Scans (including Tilt measurements), and Auto Tests and Ingress.Press the Retrieve soft key or Enter key. To delete the highlighted file, press Delete soft key. You can delete multiple files by selecting the file, pressing the Select Multiple Files soft key and then pressing the Delete soft key. This allows you to change the name of the file. Viewing Scan Files There are three types of scans that you can store and view — full scans, six-channel scans and tilt measurements. A bar graph appears indicating the status of the printout. NOTE: When viewing a Scan file, the date and time that the file was stored appears in the status bar and the file name appears at the top of the screen above the title bar. The report will include the highlighted interval plus the following three for a total of (up to) four intervals. Indicators appear within the list to flag out-of-limit conditions.The Cycle Through Test Points soft key is only available if there is more than one enabled test point. Choose Ingress icon from the NAVIGATOR. The INGRESS screen will appear: The graph displays frequency on the X-axis and amplitude on the Y-axis. Your MS1400 allows you to adjust the resolution so that you can optimize the response time depending upon how much detail you want to see. There are four resolution settings; LOW, MEDIUM, HIGH, and ULTRA. The measurement is not retained when another mode is selected or the MS1400 is shut off.
Items include; Help, Information, and Technical Support. During normal operations, soft key icons appear at the bottom of the display. Each help screen describes the condition of the soft key icons at the time HELP was pressed.Here you can view information concerning your MS1400.However, if you need assistance or have questions related to the use of this product, call or email Acterna’s Technical Assistance Center (TAC) for customer support. Region. Please consult the factory for details. 1019-00-0467 MicroStealth MS1400 generic serial printer cable-25 pin male connector 1019-00-0468 MicroStealth MS1400 to printer cable. Replace this connector only with a Acterna approved precision F- connector. The life of the F-connector will be extended by keeping a test lead attached to the instrument at all times. To remove or replace the battery pack, pull the notched tab downward, and lift the battery pack. To install the battery pack, insert the bottom of the pack into the groove and press down on the battery pack until it clicks into place. You should recharge the battery upon receipt of your unit to ensure a full charge.The serial interface has a driver built in for RS232 serial binary data interchange. The connector is located on the bottom of the unit behind a water-resistant cover. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn't end up there. Please also check your spam folder. Today’s installers require a Signal Level Meter (SLM) that combines advanced measurement capability with the ruggedness needed for everyday field use. The family of JDSU Signal Level Meters offers comprehensive, reliable measurement performance to meet the needs of installers deploying services at every phase of the network cycle. The same easy-to-use, icon-based interface for all instruments in the family, minimizes training requirements and downtime. All instruments are light, portable, durable and water-resistant.
They are designed to meet the tough requirements of field use and like all JDSU instruments, they are built to last and to deliver sustained value. The six-channel scan and installation check provide the essential capability to ensure highquality CATV installation. The MS-1400 also can beupgraded to a JDSU CLI-1450 or CLI-1750 which adds more advanced capability including signal leakage detection. If all levels are within limits, a will show in the far right column. If any parameter is out of tolerance an X will Passing channels have a in the right hand column The multichannel display quickly and clearly indicates if all channels are being received at the subscriber’s drop at appropriate system design levels. Up to four different limits can be configured: tap, ground block, subscriber drop, and custom. This feature can be used to determine if a subscriber connection meets cable network or government specifications. Compatible with dual sound and NICAM. The MS-1400 also can beupgraded to a JDSU CLI-1450 or CLI-1750 which adds more advanced capability including signal leakage detection. The six-channel scan and installation check provide the essential capability to ensure high- quality CATV installation. This product has been discontinued Please consider this product instead: DSAM Digital Service Activation Meter (Discontinued) Supported Through: April 30, 2017 Overview The MicroStealth (MS) signal level meters combine comprehensive test performance, durable design, and low cost. The versatile platform offers a model for every technician, every skill level, and every budget. Highlights MS-1200 - A digital signal level meter that includes our patented digiCheck(TM), a standard 5-890 MHz frequency range, Tilt, and Full Channel Scan. MS-1300 - A digital signal level meter that includes our patented digiCheck, a standard 5-890 MHz frequency range, Reverse Ingress Scan, interval auto-testing, file storage, and StealthWare compatibility.
MS-1400 - The industry standard for advanced installation technicians. It offers a complete digital average power test capability and is available with an international language graphic interface. It can also be upgraded for leakage measurement capability. As with all Viavi meters, every MS model is designed to exceed the adverse conditions expected in everyday field use. Perform 24-hour testing with the auto-test scheduling feature. Document subscriber drop performance by transferring test measurements to StealthWare Data Analysis Software (MS-1300 and MS-1400 only). Key Features Full Scan measurement displays levels of all channels in a single spectral screen. One button Installation Test verifies that all active channels are within cable network level specifications. Ingress Scan measurement identifies unwanted ingress on the return path. It includes peak hold and adjustable dwell time to capture intrusive transient signals. The digiCheck measurement measures digital average power on digitally modulated carriers. The MS-1400 firmware is easily field upgradeable to the newest release using Acterna's CLI firmware upgrade software. How to Get Started Interested in a product demonstration. Contact us for more info, receive a price quote, or find out how to buy. Contact a Sales Expert Request a Quote By using our site you consent to our use of cookies. View our Privacy Policy. Be sure to add us to your Favorites list!. System bandwidth expansion and digital service deployment have placed more demands on installers and service technicians. Today's installers require a signal level meter that combines advanced measurement capability with the ruggedness needed for everyday field use. The MicroStealth family of SLMs offers comprehensive, reliable measurement performance for every skill level of the cable networks technician and engineer.
From field maintenance to installation, to troubleshooting today's more advanced networks, there is a MicroStealth designed to meet your specific testing needs. Discover everything Scribd has to offer, including books and audiobooks from major publishers. Start Free Trial Cancel anytime.Browse Books Site Directory Site Language: English Change Language English Change Language. Contact me; I have the exact model tester and the CD for it You will need a crossover. Specifically what do the 6 internal calibritation pots specifically adjust.Contact to the email address listed there. Hope this will. Perhaps they are similar. You can find it here:. I have USB ports in my PC no serial port. What do i need. T oday’ s installers r equire a Signal Level M eter (SLM) that combines advanc ed measurement capability with the r uggedness needed for everyday field use. The family of JDSU Signal Level M eters offers compr ehensive, reliable measur ement performance to meet the needs of installers deploying serv ices at ev er y phase of the network cycle. JDSU Signal Level M eters are designed to help installers perform their work effectively, fast er, and more easil y, to impr ove pr oductiv ity and reduce c osts. The same easy-to-use, icon-based inte r face fo r all instruments in the family, minimizes training requirements and d owntime. All instruments are light, portable, durable and water -resistant. The six-channel scan and installation check provide the essential capability to ensure highquality CATV installation. Additional standard features such as the reverse ingress scan of the MS-1300D, and customizable channel plans for the MS-1200D make JDSU Signal Level Meters the best priced performance field meters currently on the market. Page 3 SIGNAL LEVEL METERS 3 The results are displayed in a list indicating which parameters are out of tolerance. If all levels are within limits, a.
If any parameter is out of tolerance an X will be shown Pressing the cycle soft key provides more detail by bringing up a list of all channels. Page 4 SIGNAL LEVEL METERS 4 Tilt mode AutoTest Tilt measurement is a fast and effective method to balance line extenders and in-home amplifiers. To certify that the network termination and home network are within the specifications, or for proof-ofperformance compliance data, an AutoTest can be performed. Tests can be executed immediately or scheduled over a period of time. When configuring an AutoTest, information about the location at which the test is being performed can be recorded. Page 5 SIGNAL LEVEL METERS 5 Ingress scan The innovative Ingress Scan mode finds forward (MS-1400) and reverse ingress (MS-1400 and MS-1300D) problems from the tap to the drop. The operator can also set a limit threshold for simple identification of problem drops. To check for intermittent ingress, the meter can be adjusted to the Peak Hold mode to capture transient signals. The levels of analog and digital signal measurements differ according to standards and regulations. Digital signals are typically 6-14 dB below analog signals. Users can enter minimum and maximum digital channel level limits separately from analog limits in the MS-1400 only. Analog limits are available in the MS-1200D and MS1300D. Soft Carrying Case and Quick Reference Card are standard only with the MS-1300D. Part number Name Description 1013-00-0007 MS1000 Pack Includes 45 to 890 MHz frequency extension and soft carrying case. No Yes Please tell us more so that we can improve our website: How can we get in touch with you? (optional) Send Feedback Thank you for making Machinio better. Your feedback is greatly appreciated. Learn more - opens in a new window or tab This amount is subject to change until you make payment.
For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab This amount is subject to change until you make payment. If you reside in an EU member state besides UK, import VAT on this purchase is not recoverable. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab Delivery times may vary, especially during peak periods and will depend on when your payment clears - opens in a new window or tab. Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab This item may or may not be in its original packaging. See the seller’s listing for full details. Contact the seller - opens in a new window or tab and request a postage method to your location. Please enter a valid postcode. Please enter a number less than or equal to 1. Sellers may be required to accept returns for items that are not as described. Learn more about your rights as a buyer. - opens in a new window or tab You're covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing. All Rights Reserved. User Agreement, Privacy, Cookies and AdChoice Norton Secured - powered by Verisign. Something went wrong. View cart for details. All Rights Reserved. User Agreement, Privacy, Cookies and AdChoice Norton Secured - powered by Verisign. Audiojunkie 16 July 2017 05:30. You have requested the file: Name: 1996 Nils Landgren Funk Unit - Paint It Blue (1996) by pere1109.rar. Nils Landgren was born in 1956. He began playing drums at the age of six. At 13 he layed his hands and lips on the trombone and was hooked for life. Between 1972 and 1978 Nils studied classical trombone at the music college in Karlstad with David Maytan and at the university in Arvika with Ingemar Roos.
During this time he also met the legendary Swedish Folk-Jazz pioneer Bengt-Arne Wallin and the fantastic tromboneplayer and proffessor of the Graz Conservatory in Austria, Eje Thelin. These two men completely changed the way for Nils to go; from a strict classical player to an improviser with his own idea of what to play and why. Guitar Hero 3 Dlc Xbox 360 Descargar Juegos. After his graduation Nils moved to Stockholm to work as a professional tromboneplayer. First the life of a struggling jazz musician, making no money but gaining loads of experience. Albums: 1995 - Live In Stockholm 1996 - Paint It Blue 1998 - Live in Montreux - MP3 320 only 1999 - 5000 Miles 2001 - Fonk Da World 2004 - Funky ABBA 2007 - Licence To Funk 2010 - Funk For Life 2013 - Teamwork. 1995 Live In Stockholm 01. Nils Landgren Funk Unit - Traci 02. Nils Landgren Funk Unit - Soundcheck 03. Nils Landgren Funk Unit - Impressions 04. Nils Landgren Funk Unit - Cheyenne 05. Nils Landgren Funk Unit - Simple Life 06. Nils Landgren Funk Unit - The Chicken 07. Nils Landgren Funk Unit - Aint Nobody 08. Nils Landgren Funk Unit - So What 09. Nils Landgren Funk Unit - Mr. Nils Landgren Funk Unit - Red Horn 11. Nils Landgren Funk Unit - Yo-Yo 1996 Paint It Blue 01. You must have JavaScript enabled in your browser to utilize the functionality of this website. It is part of a system sweep solution. The SDA-4040D is a small, lightweight hand-held field CATV Sweep Analyzer for diagnosing and eliminating problems quickly in CATV system equipment. Ideal for aligning amplifiers, testing performance of forward path networks, measuring signal quality, and fulfilling FCC and CENELEC proof-of-performance requirements. Fast, sensitive spectrum analyzer. New digital QAM measurement option for forward path carriers. Digital QAM carrier demodulation includes 64, 128, and 256 QAM constellation display with zoom, average digital power level, bit error rate (BER), and 21 to 35 dB modulation error rate (MER).
QAM View option provides complete analysis of digital TV and forward cable modem signals. Find ingress fast with Field View option. Cable technicians working in the field can see the reverse path at the headend. Graphical test point compensation makes it easier to add, edit, and store parameters. Equalizer stress and microreflections. QAM ingress (noise-under-carrier). PathTrak Field View option. This charger is not for any DSAM meter. If you have any questions about this charger please ask before purchase. Thanks.The Extended Life nickel metal hydride (NiMH) batteries typically receive a full charge within six hours and the nickel cadmium (NiCd) batteries typically receive a full charge within three hours.NO International Sales unless your country is listed in this sale and will be shipped using the Global Shipping Program. Items will be sent via USPS.If you are not happy with your purchase, please contact us first before leaving response. Horse Issues people.